Portable Chemical Induction - # 2244
You may need the convenience of a battery when... you can’t get your rig to the rear of the house or you need to remove the system from the trailer and work inside of a restaurant.
The biggest complaints with chemical injectors are: 1. With more than 125’ of hose they won’t draw chemical! 2. Although it is a 20% injector it doesn’t draw enough chemical! 3. I wish I didn’t have to use a ‘pump-up’ to apply bleach!
Here is your solution to all your problems. The Allison Chem-Inductor attaches to your existing chemical injector and allows you to draw an incredible amount of chemical.
The following test was base on using a typicali injector advertised to draw at 20% (not ours) mounted on a TS-2021 General Pump running at 5.6 GPM. 1. With 100’ of hose - NO CHEM INDUCTOR 63 oz. of chem per min. 2. With 100’ of hose - WITH CHEM INDUCTOR 204 oz. of chem per min. Now Check This Out! 3. With 500’ of hose - NO CHEM INDUCTOR 0 oz. of chem per min. 4. With 500’ of hose - WITH CHEM INDUCTOR 204 oz. of chem per min.
This means that regardless of which problem you hare having you will still induce almost 2 gallons of chemical per minute into the system. Never again will you have to apply the product 2 or 3 times to get the job done. Now you’ll be on your way after the first pass. Roof Cleaners using bleach really love this system. No more ‘pump-up’ or ‘back-pac’ sprayers to lug around!
System Comes Complete with: Allison High Induction Chemical Injector Induction Pump is mounted on a convenient ‘hand carry’ base plate. This System can be detached from the Chemical Injector and utilized to spray undiluted chemical.
To be used with pressure acutated unloaders only.
NET PRICED
|