Exhaust Hood Pressure Washer- High Temp

View Larger Image

2.1 gpm, 1,500psi, Hi-temp kit for water over 130 degrees, Pressure washer comes equipped with the following:

• Hi temp packings and check valves for water over 130 degrees F
• Triplex pump with ceramic plungers & connecting rod system
• Pressure adjustment
• Built in detergent suction
• Pressure gauge
• Motor thermal protector
• 25' hose gun, lance
• Vari-spray nozzle
• Garden hose adapter with filter
• 90" GFCI cord and plug
• 115V motor

PDF parts breakdown TRXB-HW

NET PRICED

Consumer Pressure Washer

View Larger Image

Rated at 1400psi and 2gpm this easy to operate consumer model power washer is perfect for home and light duty use. Complete with hose, gun, lance, brush attachment, at the gun foaming chemical applicator, and 35’ cord with GFCI plug.

Hydroblaster EI Line

View Larger Image

EI Cold Line Standard Features Include:
• Direct drive, General Pump
• Heavy duty electric motor with reset
• Compact base with carry handle & adjustable feet
• 50’ hose rated 3000 PSI
• Trigger gun with 36” wand
• Variable pressure/spray pattern nozzle
• Downstream chemical injection
• 6’ GFCI power cord on 110 volt models
Specifications are subject to change without notice

MODEL	2/1000	3/1000	3/1500		2/2000	3/3000
VOLUME (GPM)	2.2	3	3		2	2.5
PRESSURE (PSI)	1000	1000	1500		2000	3000
ELECTRIC MOTOR (HP)	1.5	2	3		3	5
VOLTAGE	120, 1 phase	120, 1 phase	230, 1 phase		230, 1 phase	230, 1 phase
AMPERAGE	14	17	14		14	25
ELECTRIC CORD	6’ GFCI cord			No cord provided
WEIGHT	70	78	85		85	135
ELECTRICAL CONTROL	On/Off switch and motor overload protection.
OVERLOAD	Thermal sensing, manual reset.
DRIVE	Pump and motor are direct coupled.
LENGTH	20						23
WIDTH	12						14
HEIGHT	14						19

Meets UL1776 Standards for Indoor and Outdoor Applications

Click here for a PDF version with available options.

Hydroblaster E Line

View Larger Image

E Line Standard Features Include:
• Heavy duty electric motor with reset on all 1 phase
• Belt drive
• Full equipment covers
• Trigger gun with insulated variable pressure wand
• 15 degree nozzle
• 50’ hose rated 3000 PSI
• Downstream chemical injection

MODEL	4/1000	4/2000	4/3000	5/3000	5/5000
VOLUME (GPM)	4	4	4	5	5
PRESSURE (PSI)	1000	2000	3000	3000	5000
ELECTRIC MOTOR(HP)	3	5	7.5	10	20
VOLTAGE1 (STD)	(B), C, D	(B), C, D	B,(C), D	(C), D	(C), D
AMPERAGE	16, 8, 4	25, 14, 7	36,28,14	28, 14	55, 35
OVERLOAD	Current sensing, manual reset.
WEIGHT (LBS)	395	386	428	444	650
LENGTH (INCHES)	45	45	45	45	45
WIDTH	42	42	42	42	42
HEIGHT	48	48	48	48	48

Click here for a PDF version with available options.

Hydroblaster Demuck-Single Gun

View Larger Image

Standard equipment:
• NEMA 4X electrical enclosure
• push button on/off pump controls
• pressure gauge
• low intake water protection system
• automatic fresh water makeup and pump bypass system

GENERAL SPECIFICATIONS AND USE:
Heavy mud and dirt accumulations can be removed quickly with the Hydroblaster
Demucking system. Water is fully recycled from your wastewater collection
system. Just place our wastewater pickup (pumping) system in your sump. Water
is automatically fed to the Demucking systems solids separation tank.
Particulates, as low as 40 microns, will be removed before water is used by the
pumping system. At a rate of 30 gallons per minute water is forced through an
adjustable nozzle at 200 PSI allowing the operator to use a gentle fan or direct
stream of water for heavy accumulations. Dozers, front end loaders, back hoes
and all heavy equipment can be cleaned quickly with this system.

Click here for a PDF version with available options.

Hydroblaster Demuck-Dual Gun

View Larger Image

Standard Equipment:
• NEMA 4X electrical enclosure
• push button on/off pump controls
• pressure gauge
• low intake water protection system
• automatic fresh water makeup and pump bypass system

GENERAL SPECIFICATIONS AND USE:
Heavy mud and dirt accumulations can be removed quickly with the
Hydroblaster Demucking system. Water is fully recycled from your
wastewater collection system. Just place our wastewater pickup
(pumping) system in your sump. Water is automatically fed to the
Demucking systems solids separation tank. Particulates, as low as 40
microns, will be removed before water is used by the pumping system.
At a rate of 30 gallons per minute, from each gun, water is forced through
an adjustable nozzle at 200 PSI allowing the operators to use a gentle
fan or direct stream of water for heavy accumulations. Dozers, front end
loaders, back hoes and all heavy equipment can be cleaned quickly with
this system.

Click here for a PDF version with available options.