Portable Chemical Induction - # 2244

View Larger Image

You may need the convenience of a battery when...
you can’t get your rig to the rear of the house or you need to remove the system from the trailer and work inside of a restaurant.

The biggest complaints with chemical injectors are:
1. With more than 125’ of hose they won’t draw chemical!
2. Although it is a 20% injector it doesn’t draw enough chemical!
3. I wish I didn’t have to use a ‘pump-up’ to apply bleach!

Here is your solution to all your problems. The Allison Chem-Inductor attaches to your existing chemical injector and allows you to draw an incredible amount of chemical.

The following test was base on using a typicali injector advertised to draw at 20% (not ours) mounted on a TS-2021 General Pump running at 5.6 GPM.
1. With 100’ of hose - NO CHEM INDUCTOR 63 oz. of chem per min.
2. With 100’ of hose - WITH CHEM INDUCTOR 204 oz. of chem per min.
Now Check This Out!
3. With 500’ of hose - NO CHEM INDUCTOR 0 oz. of chem per min.
4. With 500’ of hose - WITH CHEM INDUCTOR 204 oz. of chem per min.

This means that regardless of which problem you hare having you will still induce almost 2 gallons of chemical per minute into the system. Never again will you have to apply the product 2 or 3 times to get the job done. Now you’ll be on your way after the first pass. Roof Cleaners using bleach really love this system. No more ‘pump-up’ or ‘back-pac’ sprayers to lug around!

System Comes Complete with:
Allison High Induction Chemical Injector
Induction Pump is mounted on a convenient ‘hand carry’ base plate.
This System can be detached from the Chemical Injector and utilized to spray undiluted chemical.

To be used with pressure acutated unloaders only.

NET PRICED

Pressurized Chemical Induction System #1595

View Larger Image

The biggest complaints with chemical injectors are:
1. With more than 125’ of hose they won’t draw chemical!
2. Although it is a 20% injector it doesn’t draw enough chemical!
3. I wish I didn’t have to use a ‘pump-up’ to apply bleach!

Here is your solution to all your problems. The Allison Chem-Inductor attaches to your existing chemical injector and allows you to draw an incredible amount of chemical.

The following test was base on using a typicali injector advertised to draw at 20% (not ours) mounted on a TS-2021 General Pump running at 5.6 GPM.
1. With 100’ of hose - NO CHEM INDUCTOR 63 oz. of chem per min.
2. With 100’ of hose - WITH CHEM INDUCTOR 204 oz. of chem per min.
Now Check This Out!
3. With 500’ of hose - NO CHEM INDUCTOR 0 oz. of chem per min.
4. With 500’ of hose - WITH CHEM INDUCTOR 204 oz. of chem per min.

This means that regardless of which problem you hare having you will still induce almost 2 gallons of chemical per minute into the system. Never again will you have to apply the product 2 or 3 times to get the job done. Now you’ll be on your way after the first pass. Roof Cleaners using bleach really love this system. No more ‘pump-up’ or ‘back-pac’ sprayers to lug around!

System Comes Complete with:
Allison High Induction Chemical Injector
Induction Pump is mounted on a convenient ‘hand carry’ base plate.
This System can be detached from the Chemical Injector and utilized to spray undiluted chemical.

To be used with pressure acutated unloaders only.

NET PRICED

Applicator Assembly #1596

View Larger Image

Poly Barb Fittings

View Larger Image

Poly Barbs for Shurflo and Flojet Pumps, Excellent in Chemical Applications. Choose the correct size from the drop down list. Prices may vary based on the model selected. NET PRICED

Old Part# 141077P, 14180P, 141125P, 141132P 

12 V Shurflo Pump 8000-543-236 # 1049

View Larger Image

12 volt powered Shurflo Pump model # 8000-543-236. Rated for 60 psi and 1.4 gpm with viton valves. NET PRICED

Old Part# 1231-101

12 V Shurflo Pump 8000-543-238 # 1050

View Larger Image

12 volt powered Shurflo Pump model # 8000-543-238. Rated for 100 psi and 1.8 gpm with viton valves. NET PRICED

Old Part# 1231-102

12 V Shurflo Pump 2088-343-135 # 1051

View Larger Image

12 volt powered Shurflo Pump model # 2088-343-135. Rated for 45 psi and 3.0 gpm with viton valves. NET PRICED

Old Part# 1231-103

12 V Shurflo Pump 2088-313-145 # 1052

View Larger Image

12 volt powered Shurflo Pump model # 2088-313-145. Rated for 45 psi and 3.6 gpm with viton valves. NET PRICED

Old Part# 1231-104

115 V Shurflo Pump 8000-533-236 # 1053

View Larger Image

115 volt powered Shurflo Pump model # 8000-533-236. Rated for 60 psi and 1.4 gpm with viton valves. NET PRICED

Old Part# 1231-201

115 V Shurflo Pump 8030-863-239 # 1054

View Larger Image

115 volt powered Shurflo Pump model # 8030-863-239. Rated for 150 psi and 1.5 gpm with viton valves. NET PRICED

Old Part# 1231-203

115 V Shurflo Pump 8020-833-238 # 1055

View Larger Image

115 volt powered Shurflo Pump model # 8020-833-238. Rated for 60 psi and 1.4 gpm with viton valves. NET PRICED

Old Part# 1231-250

Shurflo Repair Kits

Complete repair kits for Shurflo pumps, check valves, bypass, diaphragm, pressure switch. Choose the appropriate repair kit for your pump fron the drop down list. Prices may vary based on item selected.  NET PRICED