Stainless Case Pressure Gauge- 3000 PSI # 1130

3,000 PSI Pressure Gauge, Stainless Steel Case, Glycerine Filled Gauge, 1/4" MPT Mount, 2 1/2" Face. NET PRICED

Old Part# 1799-103

Stainless Case Pressure Gauge- 4500 PSI # 1131

4,500 PSI Pressure Gauge, Stainless Steel Case, Glycerine Filled Gauge, 1/4" MPT Mount, 2 1/2" Face. NET PRICED

Old Part# 1799-104

Stainless Case Pressure Gauge- 6000 PSI # 1132

View Larger Image

6,000 PSI Pressure Gauge, Stainless Steel Case, Glycerine Filled Gauge, 1/4" MPT Mount, 2 1/2" Face. NET PRICED

Old Part# 1799-105

Stainless Case Pressure Gauge- 10000 PSI # 1133

10,000 PSI Pressure Gauge, Stainless Steel Case, Glycerine Filled Gauge, 1/4" MPT Mount, 2 1/2" Face. NET PRICED

Old Part# 1799-110

QC Gauge Holder- # 1232

View Larger Image

Quick Connect Coupler for Pressure Gauge, Brass Uni-Body, Straight Through Flow, Port for Pressure Gauge. NET PRICED 

Old Part# 2299-996

Quick Connect Pressure Gauge # 1233

View Larger Image

6,000 PSI Pressure Gauge, Glycerine Filled, Uni-Body Quick Connect. NET PRICED

Old Part# 2299-997

Water Flow Meter # 1797

View Larger Image

Electroninc flow meter rated form 0 to 18+ gpm. Heavy duty nylon and polypropylene construction assembled with stainless steel screws. Interior viton o-ring seals and exterior Buna-N seals. Easy press buttons and .8 inch LCD display characters let you know exactly what your pump is producing. NET PRICED

Old Part# FM115

Fuel Pressure Gauge # 1128

View Larger Image

200 PSI Fuel Pressure Gauge, Unit comes ready to mount with 2 1/2” Long X 1/8” Pipe. NET PRICED

Old Part# 1751-200

Gauge Port Valve Cap #1060

View Larger Image

Replace a valve cap on the top of the pump with a gauge port valve cap for mounting a pressure gauge directly on the pump. Fits EZ series General pumps. NET PRICED

Old Part# 1310-004

Gauge Port Valve Cap # 1061

View Larger Image

Replace a valve cap on the top of the pump with a gauge port valve cap for mounting a pressure gauge directly on the pump. Fits 47 series General pumps (Example: TS2021/WS202). NET PRICED

Old Part# 1310-005

Pump Head Tester # 1229

View Larger Image

Connect the pump head tester directly to the pump head and install the pressure gauge inline for testing the pump performance. Comes equipped with two pressure relief valves.

Directions for use:

1. Remove the unloader.
2. Install the pump head tester and pressure gauge to the pump head.
3. Place a new properly sized nozzle in the tester quick connect.
4. While firmly holding on to the tester gun, pointing away from anyone or any surface, start the machine and increase rpm to normal operating range.
5. View the pressure gauge to determine if the pump is bad or your problem is elsewhere.

NET PRICED

Old Part# 2299-987